TLC5954RTQR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFQFN Exposed Pad |
| Number of Pins | 56 |
| Weight | 200.005886mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 30MHz |
| Base Part Number | TLC5954 |
| Number of Outputs | 48 |
| Max Output Current | 37.3mA |
| Max Supply Voltage | 3.6V |
| Output Current | 34.9mA |
| Max Supply Current | 25.5mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 3.6V |
| Output Current per Channel | 34.9mA |
| Current - Output / Channel | 24.4mA 34.9mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| Max Input Voltage (DC) | 3.6V |
| Min Input Voltage (DC) | 3V |
| Number of Segments | 48 |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.3V |
| Height | 1mm |
| Length | 8mm |
| Width | 8mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
TLC5954RTQR Overview
Board space is saved by its 56-VFQFN Exposed Pad package.A LED driver using this design has 48 outputs.For mounting, it uses the Surface Mount method.It is highly reliable and high-performing when it emerges as a Linear.If the led driver ic is set to -40°C~85°C TA, it will work normally.The benefits of Signage are considerable.Frequency 30MHz is the basis of operation.The system operates with a termination of 0.The configuration of the board is built around 56 pins.There are 48 segments in it.It has been mounted on Surface Mount.It's under the TLC5954 base part number.It is acceptable to have a maximum voltage of 3.6V.There is 10V voltage output from the device.With 3V as the minimal input voltage, it operates.Whenever the maximum supply current is allowed, the value reaches 3.6V.When the maximum supply current is less than 25.5mA, the device is able to provide a high level of efficiency.34.9mA is the maximum current the load can handle.When operating at the maximum output current of 37.3mA, it is capable of providing all the benefits associated with LED drivers.
TLC5954RTQR Features
Available in the 56-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5954RTQR Applications
There are a lot of Texas Instruments TLC5954RTQR LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Refrigeration lighting
- Dimmable LED for vehicle interiors
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Street lighting
- Scanners and Handy Terminals