TLC5947RHBRG4
| Parameters | |
|---|---|
| Package / Case | VQFN EP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | DUMMY VAL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 4MHz |
| Pin Count | 32 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.482W |
| Nominal Supply Current | 90mA |
| Power Dissipation | 3.482W |
| Current - Output | 30mA |
| Voltage - Output | 30V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -3mA |
| Low Level Output Current | 3mA |
| fmax-Min | 30 MHz |
| Number of Segments | 24 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5947RHBRG4 Overview
The VQFN EP package conserves board space. A frequency of 4MHz is used as the basis for operation.There are 32 terminations that are designed to operate with it.It has a base configuration of 32 pins.24 segments exist.It's acceptable for the voltage to be 5.5V.There is 30V voltage output from the device.This device contains 32 pins.As a result of its characteristics, it is also classified as Display Drivers.Initially, it accepts a voltage of 3V.With a minimal supply voltage of 3V, it reaches the highest efficiency levels.There is 5.5V maximum value for supply current.For stable operation, the operating temperature should not exceed 85°C.In order to maintain stable operation, a temperature greater than -40°C is essential.It comes with an interface chip marked LED DISPLAY DRIVER.There is a current of 30mA can be supplied to the load.The LED driver is further characterized by a DUMMY VAL.
TLC5947RHBRG4 Features
Available in the VQFN EP package
Frequency of 4MHz
Supply voltage of 3.3V
DUMMY VAL
TLC5947RHBRG4 Applications
There are a lot of Texas Instruments TLC5947RHBRG4 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Stage Lighting and Signage
- LED backlight driver for LCD displays for portable equipment
- Other Electronic Devices
- LED headlights
- Constant Voltage Power Source for portable equipment
- High-end retail lighting
- White LED Backlight for portable equipment
- Auxiliary lights for on-vehicle cameras
- Down lighting