TLC5930PWPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | HTSSOP EP |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Pin Count | 24 |
| Number of Outputs | 12 |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.7W |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.7W |
| Max Supply Current | 50mA |
| Current - Output | 40mA |
| Voltage - Output | 10V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 12 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5930PWPG4 Overview
In order to save board space, the HTSSOP EP package is used. LED drivers have a total of 12 outputs that are used in the design of the drivers.It operates on the basis of the frequency of 25MHz.It operates with 24 terminations.This configuration is built upon 24 pins.It is estimated that there are 12 segments.There is a mounting of it by Surface Mount.3.6V is an acceptable maximum value for the supply voltage.A voltage of 10V is produced by it.In addition, it is equipped with a total of 24 pins.Additionally, it can be classified as Display Drivers based on its characteristics.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.When the maximum supply current is less than 50mA, this device is capable of providing high efficiency.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -20°C.An interface IC LED DISPLAY DRIVER is provided with the part.Maintain a constant output current of 40mA.
TLC5930PWPG4 Features
Available in the HTSSOP EP package
Frequency of 25MHz
Supply voltage of 3.3V
TLC5930PWPG4 Applications
There are a lot of Texas Instruments TLC5930PWPG4 LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Museum lighting
- Other Electronic Devices
- Linear fluorescent
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights