TLC59212IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Base Part Number | TLC59212 |
| Function | Master Reset |
| Output Type | Inverted |
| Max Output Current | 40mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 20μA |
| Output Current | 40mA |
| Turn On Delay Time | 70 ns |
| Min Input Voltage | 4.5V |
| Current - Quiescent (Iq) | 5μA |
| Max Input Voltage | 5.5V |
| Current - Output High, Low | - 40mA |
| Differential Output | NO |
| Output Polarity | TRUE |
| Input Characteristics | STANDARD |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 210ns @ 5V, 50pF |
| Driver Number of Bits | 8 |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Interface Standard | GENERAL PURPOSE |
| Transmit Delay-Max | 250 ns |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59212IPWR Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Inverted. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In total, it contains 1 elements. As a result, it consumes 5μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. The object belongs to the TLC59212 family. Power is supplied from a voltage of 5V volts. There is 5pF input capacitance for this T flip flop. There are 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in Peripheral Drivers. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be set to 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 40mA. It is possible to obtain a frequency of 1MHz.
TLC59212IPWR Features
Tape & Reel (TR) package
20 pins
5V power supplies
TLC59212IPWR Applications
There are a lot of Texas Instruments TLC59212IPWR Flip Flops applications.
- Consumer
- Load Control
- Differential Individual
- Instrumentation
- Safety Clamp
- Data Synchronizers
- Single Up Count-Control Line
- Synchronous counter
- Asynchronous counter
- Single Down Count-Control Line