TLC5905PAP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-PowerTQFP |
| Number of Pins | 64 |
| Weight | 258.207457mg |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 4.9W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 15MHz |
| Base Part Number | TLC5905 |
| Pin Count | 64 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 70mA |
| Power Dissipation | 4.9W |
| Output Current | 80mA |
| Max Supply Current | 70mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 15 MHz |
| Supply Voltage1-Nom | 5V |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5905PAP Overview
Its 64-PowerTQFP package is used to save board space. LED drivers with this design have 16 outputs.In this case, mounting method is Surface Mount.It emerges as a Linear with high efficiency.When the temperature is -30°C~85°C TA, it can work normally.As a result, it operates in accordance with the frequency of 15MHz.The system operates with a termination of 0.It is configured with 64 pins as its base.A voltage supply below 4.5V may cause undetermined failures.There are estimated to be 16 segments.There is a device mounted on the Surface Mount.There is a base part number TLC5905 for this LED driver.5.5V is an acceptable maximum value for the supply voltage.The device has a voltage output of 17V volts.In addition, it has 64 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.With a minimal supply voltage of 4.5V, it reaches the highest efficiency levels.If the maximum supply current is less than 70mA, the device is capable of providing high efficiency.80mA is the maximum current the load can handle.The internal voltages needed to power systems is 5V.
TLC5905PAP Features
Available in the 64-PowerTQFP package
Operating temperature of -30°C~85°C TA
Frequency of 15MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5905PAP Applications
There are a lot of Texas Instruments TLC5905PAP LED Driver ICs applications.
- Sports Facility Lighting
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- LED Lightings for Inspection Devices
- LED headlights
- Constant Voltage Power Source for portable equipment