TLC5904PZPG4
| Parameters | |
|---|---|
| Package / Case | TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Weight | 505.386949mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 15MHz |
| Pin Count | 100 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Power Dissipation-Max | 4.7W |
| Nominal Supply Current | 70mA |
| Power Dissipation | 4.7W |
| Max Supply Current | 70mA |
| Current - Output | 80mA |
| Voltage - Output | 17V |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Supply Voltage1-Nom | 5V |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5904PZPG4 Overview
TQFP saves board space. LED drivers with this design have 16 outputs.Using the frequency of 15MHz, it operates.In this case, the terminations are set to 100.This configuration is built upon 100 pins.A total of 16 segments are estimated.It is acceptable to have a maximum voltage of 5.5V.The voltage output by it is 17V.A device with 100 pins is available.In addition to Display Drivers, it is also classified by its characteristics.At its minimal input voltage, it operates at 4.5V.The system works with a minimum supply voltage of 4.5V in order to achieve maximum efficiency.Supply current cannot exceed 5.5V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 70mA.A stable operating temperature of 85°C is required.Maintaining a temperature above -20°C is essential for stabilizing operation.Powering systems requires 5V voltages.An interface IC LED DISPLAY DRIVER is provided with the part.There is a current of 80mA can be supplied to the load.
TLC5904PZPG4 Features
Available in the TQFP package
Frequency of 15MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5904PZPG4 Applications
There are a lot of Texas Instruments TLC5904PZPG4 LED Driver ICs applications.
- Stage Lighting and Signage
- Museum lighting
- Architectural lighting
- Dimmable LED for vehicle interiors
- Medical surgery lighting
- Gallery lighting
- Down lights
- Down lighting
- LED Lightings for Industrial Equipment
- General lighting