TLC354IDRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LinCMOS™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC354 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Drain, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 600μA |
| Output Current | 20mA |
| Max Supply Current | 600μA |
| Quiescent Current | 800μA |
| Response Time | 650 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~16V ±0.7V~8V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 5pA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TLC354IDRG4 Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, MOS, Open-Drain, TTL output is used here.This chip is designed with the Tape & Reel (TR) package.14 terminals are found on the comparator.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.Electronic comparator is possible to classify the chip as Differential .Electronic comparator consists of 4 elements in total.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.14 pins are present on the comparator.You can search TLC354 if you are looking for more pin-to-pin solutions.A quiescent current of 800μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 600μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 600μA .5V power supplies are enough to run the device.The part belongs to the series of comparator LinCMOS? .
TLC354IDRG4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 800μA
TLC354IDRG4 Applications
There are a lot of Texas Instruments TLC354IDRG4 linear comparators applications.
- Automatic Test Equipment
- Wearable Devices
- Hand-Held Electronics
- Mobile Phones and Tablets
- DC/DC and AC/DC power supplies
- Window Comparators
- Appliances
- Battery-Powered Electronics
- Window Comparators
- Consumer Medical Electronics