TLC339MDG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC339 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Output Current | 20mA |
| Max Supply Current | 80μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 175μA |
| Response Time | 2500 ns |
| Common Mode Rejection Ratio | 84 dB |
| Voltage - Supply, Single/Dual (±) | 4V~16V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Supply Voltage Limit-Max | 18V |
| Input Bias Current | 5pA |
| Current - Quiescent (Max) | 175μA |
| Voltage - Input Offset (Max) | 5mV @ 10V |
| Current - Input Bias (Max) | 5pA @ 5V |
| CMRR, PSRR (Typ) | 84dB CMRR |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC339MDG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type CMOS, Open-Drain is used for this comparator.As a result, it is designed with Tube package.As you can see, the comparator has14 terminals.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical General Purpose .The total number of elements is 4 .The device is equipped with 14 pins.The recommended mounting type is Surface Mount .A temperature setting of -55°C~125°C should be used for the operating temperature in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions by searching TLC339 .The comparator presents a quiescent current of 175μA volts.The board has a Surface Mount for mounting on a PCB or any other board.For normal use of the device, the nominal supply current should be 80μA .If the current supply exceeds 80μA , the comparator might be damaged.This device requires 5V power supplies to operate.Comparator electronics is a comparator part from the LinCMOS? series.The operating supply voltage for normal operation should be 5V .The device is acceptable to pack by TR .
TLC339MDG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 175μA
TLC339MDG4 Applications
There are a lot of Texas Instruments TLC339MDG4 linear comparators applications.
- Battery management and protection
- Point of load regulators
- Window Comparators, Multivibrators
- Automatic Test Equipment
- Pulse, Squarewave, and Time Delay Generators
- Body Control Modules
- Power Supervision
- Current and voltage sensing
- Window Comparators
- Metering Systems