TLC339IDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 950mW |
| Nominal Supply Current | 80μA |
| Power Dissipation | 950mW |
| Max Supply Current | 80μA |
| Current - Output | 20mA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 125μA |
| Response Time | 2.5 μs |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 30nA |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Max Input Current | 5pA |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC339IDG4 Overview
The product is packaged in SOIC in order to facilitate transportation.Ready for shipping in Rail/Tube package.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The type of the chip can be classified as General Purpose .As a result, it contains 14 pins.Electronic comparator has 14 pins.A quiescent current of 125μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 80μA .A current supply greater than 80μA may result in the comparator malfunctioning.The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum current of 5pA into the device.Comparator electronics is not recommended to maintain a temperature above 125°C .A temperature below -55°C is not suitable for the device.Compatibility is defined as 16V when the comparator is operating at its maximum supply voltage.This comparator can be supplied with a voltage as low as 3V .The output quality of 4 channels is maintained by cooperating with each other.The operating supply voltage for normal operation should be 5V .Its output current is rated as 20mA .
TLC339IDG4 Features
General Purpose IC
Quiescent Current: 125μA
TLC339IDG4 Applications
There are a lot of Texas Instruments TLC339IDG4 linear comparators applications.
- Limit Comparators
- Threshold Detectors
- Set Top Boxes
- Pulse, Squarewave, and Time Delay Generators
- Mobile Communications
- High-Speed Sampling Circuits
- General-Purpose, Low-Voltage Applications
- Appliances
- Industrial
- Battery-Powered Electronics