TLC272BID
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLC272 |
| Pin Count | 8 |
| Power Supplies | 4/16V |
| Number of Channels | 2 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 4mA |
| Power Dissipation | 725mW |
| Slew Rate | 5.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 0.7pA |
| Voltage - Supply, Single/Dual (±) | 4V~16V ±2V~8V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.7MHz |
| Gain Bandwidth Product | 2.2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 87.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 290μV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.7MHz |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.00006μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC272BID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 2mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 1.4mA . Keeping the voltage gain at 87.23dB is the best course of action. There are a total of 2 channels available on the op amps. The linear amplifier is packaged by using a TR axis. LinCMOS? corresponds to linear amplifier's series.
TLC272BID Features
8 Pins
supply voltage of 5V
87.23dB voltage gain
TLC272BID Applications
There are a lot of Texas Instruments TLC272BID Instrumentational OP Amps applications.
- earphone
- Measurements of Wheatstone bridge
- Polarized electrodes
- Mobile phone
- Proportional counter tubes
- Automatic control
- Strain gauges
- Exponential operation circuits
- Differentiator circuits
- ECG equipment