TLC2264IN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LinCMOS™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TLC2264 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 8V |
| Number of Elements | 4 |
| Operating Supply Current | 850μA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 1.15W |
| Output Current | 50mA |
| Slew Rate | 0.55V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 4.4V~16V ±2.2V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Bandwidth | 710 kHz |
| Gain Bandwidth Product | 730kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 710 kHz |
| Voltage Gain | 114.81dB |
| Average Bias Current-Max (IIB) | 0.0008μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 8V |
| Voltage - Input Offset | 300μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 710 kHz |
| Max I/O Voltage | 2.5mV |
| Input Offset Current-Max (IIO) | 0.0008μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC2264IN Overview
A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 14 terminations over the past year. Linear amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 2.5mV. This electronic part is recommended for mounting type Through Hole. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 850μA, this op amp ic can operate. 114.81dB should be the voltage gain. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. There is a rating of 4 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 8V voltage. Instrumentation amplifiers are numbered by their LinCMOS? series.
TLC2264IN Features
14 Pins
supply voltage of 5V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLC2264IN Applications
There are a lot of Texas Instruments TLC2264IN Instrumentational OP Amps applications.
- Video data acquisition
- Instrumentation
- Proportional counter tubes
- PDA
- Laptop
- Tablets
- Video conversion and routing
- Multiplication circuits
- Wireless base stations
- Medical instruments