TL494CPWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 15V |
| Frequency | 300kHz |
| Base Part Number | TL494 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 7V~40V |
| Quiescent Current | 7.5mA |
| Control Features | Dead Time Control, Frequency Control |
| Input Voltage (Min) | 7V |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 100ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 40 ns |
| Max Duty Cycle | 45 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL494CPWR Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. The pmic is packaged in Cut Tape (CT) solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 7V~40V is the operating voltage and supply voltage of the dc control. A 0°C~70°C TA dc switcher is not a problem. There is a switch at 1kHz~300kHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of 16 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "TL494". There are a total of 16 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. 7V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 40V voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. Voltage regulator dc to dc is designed to operate at 45 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 300kHz Hz. During dormancy, the dc switching uses 7.5mA. This voltage controller requires a supply voltage of 15V.
TL494CPWR Features
Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz
TL494CPWR Applications
There are a lot of Texas Instruments TL494CPWR DC to DC converter applications.
- Combined machine tools
- Arc suppression circuits
- Imported equipment
- Production lines
- Scientific research
- Game consoles
- Various CNC machine tools
- CMM
- Medical equipment
- USB circuits