TL3116IPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Output Type | TTL |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 5V |
| Power Dissipation-Max | 525mW |
| Nominal Supply Current | 14.7mA |
| Power Dissipation | 525mW |
| Max Supply Current | 14.7mA |
| Current - Output | 20mA |
| Propagation Delay | 12 ns |
| Quiescent Current | 15mA |
| Response Time | 9.9 ns |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1.1μA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 5V |
| Min Dual Supply Voltage | 2.5V |
| Max Input Current | 1.1μA |
| Length | 4.4mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TL3116IPWG4 Overview
A convenient packaging is provided in the form of TSSOP .A comparator with an output type of TTL is being used.This chip is designed with the Rail/Tube package.As you can see, the comparator has8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical General Purpose comparator.The device contains 8 pins.Electronic comparator has 8 pins.This comparator presents a quiescent current of 15mA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 14.7mA .If the current supply exceeds 14.7mA , the comparator could malfunction.Electronic comparator is possible to input a maximum of 1.1μA current into the device.Comparator electronics is not recommended to operate at a temperature higher than 85°C .Comparator electronics cannot be used at a temperature below -40°C .A comparator is designed to operate at a maximum supply voltage of 10V .Comparator electronics is possible to operate this comparator wComparator electronicsh a minimum supply voltage of 5V .To maintain the output quality, 1 channels work together.This device is rated for 20mA mA output current.
TL3116IPWG4 Features
TTL output capability
General Purpose IC
Quiescent Current: 15mA
TL3116IPWG4 Applications
There are a lot of Texas Instruments TL3116IPWG4 linear comparators applications.
- Hand-Held Electronics
- Motor drives
- Portable Battery Monitoring
- Pulse, Squarewave, and Time Delay Generators
- Lithium ion battery monitoring
- Infotainment & cluster
- Infotainment and Clusters
- High-Speed Sampling Circuits
- Metering Systems
- Factory automation & control