TL16PC564BLVIPZG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES 3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16PC564 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| Nominal Supply Current | 18mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 60MHz |
| Data Rate | 1 Mbps |
| Address Bus Width | 10 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Bus Compatibility | PCMCIA |
| Data Transfer Rate-Max | 0.0140380859375 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TL16PC564BLVIPZG4 Overview
UART is available in the cost-effective 100-LQFP package.Transmission uses 1, UART channels.Tray is adopted for packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.100 terminations are used as parts of its configuration.For its operation, it requires a supply voltage of 5V.In the present state, this electronic part is Obsolete.Data is communicated via 1 serial I/Os.You can mount it by using Surface Mount.There is 2.7V~3.3V supply voltage for it.An IC with 100 pins is what this device is.The clock frequency of this IC is measured at 60MHz.UART is included under the subcategory of Serial IO/Communication Controllers as a result of a series of similarUARTies between UART and other similar entUARTies.The operating temperature should not exceed -40°C to ensure normal work for a long time.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.The 100 pins are at the core of the device's configuration.Surface Mount is used for mounting it.Its high-efficiency operation relies on a voltage of 5V.Furthermore, ALSO OPERATES 3V SUPPLY can also be performed.Its base part number is TL16PC564.
TL16PC564BLVIPZG4 Features
1 serial I/Os
Clock frequency of 60MHz
Operating supply voltage of 5V
ALSO OPERATES 3V SUPPLY
TL16PC564BLVIPZG4 Applications
There are a lot of Texas Instruments TL16PC564BLVIPZG4 UARTs applications.
- Industrial computing
- Portable and battery operated devices
- Serial to Parallel/Parallel to Serial Converter
- Cellular Data
- Infrared Transceivers
- Multi-port RS-232/RS-422/RS-485 Cards
- Battery Operated Electronics
- Remote Access Servers
- Gaming Terminals
- Router C ontrol