TL16CP754CPMR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP754 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 28mA |
| Max Supply Current | 28mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP754CPMR Overview
Alternatively, UART can be purchased in the cost-effective 64-LQFP package.The transmission of data takes place over 4, QUART channels.Tape & Reel (TR) is adopted for packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.In order to configure this device, 64 terminations are used.In order to operate it, a supply voltage of 5V is required.At present, this electronic part has a status of Active.A total of 4 serial I/Os are used to communicate data.The mount can be accessed via the Surface Mount method.There is 1.62V~5.5V supply voltage for it.In this case, the electronic device is a type of integrated circuit with 64 pins.There is a 48MHz clock frequency for this IC.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.Ideally, the operating temperature should not exceed -40°C in order to ensure long-term performance.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 85°C.The configuration of this device is based on the 64 pins.UART possesses some characteristics of Internal Oscillator.The mount is done using Surface Mount.When power supplies of 1.8/5V are available, it is a reliable and efficient power supply for electronic designers.The supply voltage of 1.8V is provided for its high-efficiency operation.Additionally, it is capable of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.In order to identify this part, its base part number is TL16CP754.The supply current of 28mA is an allowable maximum value.
TL16CP754CPMR Features
4 serial I/Os
Clock frequency of 48MHz
Power supplies of 1.8/5V
Operating supply voltage of 1.8V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16CP754CPMR Applications
There are a lot of Texas Instruments TL16CP754CPMR UARTs applications.
- Router C ontrol
- Personal Digital Assistants
- Cellular Phones DataPort
- Battery Operated Electronics
- Wireless Portable Point-of-Sale Terminals
- Ethernet Network Routers
- Handheld Computers
- Point-of-Sale Systems
- DTE for Modem Communication Systems
- Point-of- Sale Terminals