TL16CP754CPM
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP754 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 28mA |
| Max Supply Current | 28mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP754CPM Overview
There is a cost-effective 64-LQFP package available for this product.The transmission of information is carried out through 4, QUART channels.In terms of packaging, Tray is used.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.Configured with 64 terminations.The supply voltage of 5V is provided for its operation.The status of this electronic part is currently Active.Data communication is handled by 4 serial I/Os.Mounting is done through Surface Mount.In order for it to operate, a voltage of 1.62V~5.5V must be applied.This device is an integrated circuit with 64 pins.In this IC, the clock frequency is 48MHz.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.Ideally, the operating temperature should not exceed -40°C in order to ensure long-term performance.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.Initially, it will be configured with 64 pins.There are some characteristics of Internal Oscillator that are present in it.The way of mounting it is Surface Mount.UART is reliable and efficient for electronic designers to use when power supplies of 1.8/5V are provided.1.8V is the supply voltage provided for high-efficiency operation.In addition, it has the capability of performing ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.TL16CP754 is set as the base part number for the part.Supply currents up to 28mA are allowed.
TL16CP754CPM Features
4 serial I/Os
Clock frequency of 48MHz
Power supplies of 1.8/5V
Operating supply voltage of 1.8V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16CP754CPM Applications
There are a lot of Texas Instruments TL16CP754CPM UARTs applications.
- Domestic Applications
- Battery Operated Instruments
- Infrared Transceivers
- Factory Automation
- Portable and battery operated devices
- Factory Automation and Process Controls
- Industrial computing
- Cellular data devices
- Communications equipment
- Wireless Portable Point-of-Sale Terminals