TL16CP754CIPMG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP754 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 28mA |
| Max Supply Current | 28mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP754CIPMG4 Overview
There is a cost-effective 64-LQFP package available for this product.The transmission of data takes place over 4, QUART channels.Tray is adopted as the packaging option.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In its configuration, 64 terminations are used.In order for it to operate, a voltage of 5V must be provided.This electronic part is Active at present.There are 4 serial I/Os available for communication of data.UART can be mounted through a way of Surface Mount.With a supply voltage of 1.62V~5.5V, it operates.This electronic device is a type of 64-pin IC.A frequency of 48MHz is measured for this IC.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.UART is important to keep the operating temperature below -40°C to ensure a long working period.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.In its configuration, it is designed around the 64 pins.There are some characteristics of Internal Oscillator that it possesses.Using Surface Mount, it is mounted.When power supplies of 1.8/5V are available, it is a reliable and efficient power supply for electronic designers.UART operates at a high efficiency due to the voltage supply of 1.8V.Furthermore, it is also capable of ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.As a base part number, it is specified as TL16CP754.Universal asynchronous receiver-transmitter is allowed to have a maximum supply current of 28mA.
TL16CP754CIPMG4 Features
4 serial I/Os
Clock frequency of 48MHz
Power supplies of 1.8/5V
Operating supply voltage of 1.8V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16CP754CIPMG4 Applications
There are a lot of Texas Instruments TL16CP754CIPMG4 UARTs applications.
- Remote Access Servers
- Handheld Terminals and Tablets
- Network Management
- Point-of-Sale Systems
- Industrial computing
- GPS Systems
- Universal PCI Bus Add-in Card
- Router C ontrol
- Battery Operated Instruments
- Ethernet Network Routers