TL16CP754CIPM
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.62V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP754 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 28mA |
| Max Supply Current | 28mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.375 MBps |
| FIFO's | 64 Byte |
| With False Start Bit Detection | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP754CIPM Overview
In order to make it more cost-effective, this product is also available in a package of 64-LQFP.The transmission of data takes place over 4, QUART channels.In terms of packaging, Tray is adopted.SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used as its uPs/uCs/Peripheral ICs type.There are 64 terminations used in its configuration.In order for it to operate, a voltage of 5V must be provided.In the present state, this electronic part is Active.As a means of communicating data, there are 4 serial I/Os available.Surface Mount is the method for mounting it.With a supply voltage of 1.62V~5.5V, it operates.An IC with 64 pins is what this device is.This IC operates at a clock frequency of 48MHz.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 85°C.Initially, it will be configured with 64 pins.UART possesses some characteristics of Internal Oscillator.Using Surface Mount, it is mounted.When power supplies are provided of 1.8/5V, it is reliable and efficient for electronic designers.UART operates at a high efficiency due to the voltage supply of 1.8V.Furthermore, it is also capable of ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.There is a default setting for the base part number of the part to be TL16CP754.28mA is the maximum value of the supply current.
TL16CP754CIPM Features
4 serial I/Os
Clock frequency of 48MHz
Power supplies of 1.8/5V
Operating supply voltage of 1.8V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
TL16CP754CIPM Applications
There are a lot of Texas Instruments TL16CP754CIPM UARTs applications.
- GPS Devices
- Network Management
- Factory automation and process control
- Cellular Phones DataPort
- Infrared Transceivers
- Personal Digital Assistants
- Cellular data devices
- Portable and battery operated devices
- Ethernet Network Routers
- Personal Digital Assistants Modules