TL16CP554APM
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TL16CP554 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 4, QUART |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Propagation Delay | 35 ns |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL16CP554APM Overview
The package 64-LQFP offers the best value.The transmission of data takes place over 4, QUART channels.Tray is adopted for packaging.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Configured with 64 terminations.To operate it, 3.3V is provided as the supply voltage.As of right now, this electronic part is in a Active status.As a way to communicate data, the board has 4 serial I/Os.Mounting is done through Surface Mount.There is 3V~5.25V supply voltage for it.There are 64 pins on this electronic device.There is a 16MHz clock frequency for this IC.Various similarities make it an appropriate candidate for inclusion in the subcategory of Serial IO/Communication Controllers.UART is important to keep the operating temperature below -40°C to ensure a long working period.To maintain normal work for a long time, the operating temperature should not exceed 85°C.The configuration of this device is based on the 64 pins.Using the Surface Mount method, it is mounted.5V is the supply voltage provided for high-efficiency operation.There is a default setting for the base part number of the part to be TL16CP554.50mA is the maximum value allowable for supply current.
TL16CP554APM Features
4 serial I/Os
Clock frequency of 16MHz
Operating supply voltage of 5V
TL16CP554APM Applications
There are a lot of Texas Instruments TL16CP554APM UARTs applications.
- Remote Access Servers
- Handheld Terminals and Tablets
- Multi-port RS-232/RS-422/RS-485 Cards
- Ethernet Network to Serial Ports
- Gaming Terminals
- Communications equipment
- Multimedia Systems
- Point-of-Sale Systems
- Factory automation and process control
- Handheld Computers