TIBPAL20L8-5CFN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Base Part Number | TIBPAL20L8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 6 |
| Nominal Supply Current | 210mA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Access Time | 5 ns |
| Organization | 14 DEDICATED INPUTS, 6 I/O |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 14 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TIBPAL20L8-5CFN Overview
Mounting is done with the Type Surface Mount method.Program type of PLD Programmable logic device? PAL is programmable.IMPACT-X? PAL? Series provides the best value on the market in terms of performance-cost ratio.Programmable logic array's 28-LCC (J-Lead) package makes it an extremely popular Complex Programmable logic device in the electronics industry.A Tube-material can be used for Programmable array logic's Packaging.TIBPAL20L8 is the number assigned to the PLD stock's biggest part.Surface Mount is the direction in which the PLD is mounted.In the Complex Programmable logic device, 28 represents the pin number.The 125MHz frequency can still be used precisely.Currently, maximum working temperature is 75°C.In Programmable logic device's operation, it should be warmer than 0°C.4.75V volts is the only voltage it can work with.Only 5.25V Supply Voltage will work with Programmable logic controller.There are 6 programmable I/Os on this PLD.All Complex Programmable logic devices are powered by 5V.The 14 inputs are embedded into the PLD.It has been programmed with a 28 termination.There is also the possibility of applying the Programmable Logic Devices subcategory.Supplies 5V are used in the Programmable logic device.In this case, 64 refers to the number of product terms available.Multiple 8 outputs exist.A voltage of 5V is required for Programmable logic array's operation.A 28 pin is used for a specific purpose on the board.In addition, REGISTER PRELOAD; POWER-UP RESET is among the additional features.
TIBPAL20L8-5CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
6 I/Os
TIBPAL20L8-5CFN Applications
There are a lot of Texas Instruments TIBPAL20L8-5CFN PLDs (Programmable Logic Device) applications.
- High performance applications
- Microcomputer systems
- Programmable Logic Devices
- Various types of power-limited applications
- Low power applications
- Software
- Electrically Devices
- Power-limited applications
- High-end communication equipment
- Battery operated devices