TIBPAL16R8-5CN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | POWER-UP RESET; REGISTER PRELOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Base Part Number | TIBPAL16R8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Max Supply Current | 180mA |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 5 ns |
| Organization | 8 DEDICATED INPUTS, 0 I/O |
| Output Function | REGISTERED |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 5.08mm |
| Length | 24.325mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL16R8-5CN Overview
The PLD stock is mounted using Type Through Hole.It has a type of PLD Programmable logic device? of PAL programmable.The best value on the market can be found in IMPACT-X? PAL? Series' performance-cost ratio.Electronics manufacturers use the 20-DIP (0.300, 7.62mm) because of Programmable logic array's package.Programmable array logic's Packaging uses Tube-materials.There is a TIBPAL16R8-shaped section on the PLD stock that is Programmable logic array's biggest part.There is a Through Hole-mount for the PLD.Complex Programmable logic device 20 remains Programmable logic array's pin number.Programmable logic devices are still possible to operate precisely at 125MHz frequency.In the current state, 75°C is the maximum working temperature.When Programmable logic device is in Programmable logic device's operation, it should be warmer than 0°C.Using a 4.75V volt supply voltage is the only way for it to work.It can only be powered by a 5.25V supply voltage.At all times, the Complex Programmable logic device is powered by 5V.A dedicated input for 8 is embedded in the PLD.Programming has included a 20 termination.There is also the possibility of applying the Programmable Logic Devices subcategory.There are 5V supplies in the Programmable logic device.A product term has a 64 value.There are numerous 8 outputs.The Programmable logic device requires 5V voltage to operate.On the board, there are 20 pins used for specific purposes.If you supply it with a temperature of 180mA or less, it should work.There are several additional features, including POWER-UP RESET; REGISTER PRELOAD.
TIBPAL16R8-5CN Features
Mounting type of Through Hole
Maximum temperature of 75°C
TIBPAL16R8-5CN Applications
There are a lot of Texas Instruments TIBPAL16R8-5CN PLDs (Programmable Logic Device) applications.
- High-end communication equipment
- high-performance microcomputer systems
- Electrically Devices
- Highly complex logic
- Power-limited applications
- Battery operated devices
- Programmable Logic Devices
- High-speed Devices
- High performance applications
- Industrial