TIBPAL16L8-15CN
| Parameters | |
|---|---|
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TIBPAL16L8 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 75°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | PAL |
| Number of I/O | 6 |
| Voltage - Input | 5V |
| Speed | 15ns |
| Clock Frequency | 50MHz |
| Propagation Delay | 15 ns |
| Number of Inputs | 16 |
| Organization | 10 DEDICATED INPUTS, 6 I/O |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 5.08mm |
| Length | 25.4mm |
TIBPAL16L8-15CN Overview
The PLD stock is mounted using Type Through Hole screws.The programmable type of PLD Programmable logic device? is PAL.The best value on the market can be found in IMPACT-X? PAL? Series' performance-cost ratio.Electronics industry users widely use the 20-DIP (0.300, 7.62mm) because of Programmable logic array's low packaging cost.The use of Tube-materials in Programmable array logic's Packaging is widespread.5V receives the voltage input.There is a TIBPAL16L8-shaped section on the PLD stock that is Programmable logic array's biggest part.There are programmable 6 I/Os on the board.The Complex Programmable logic device is powered from a source of 5V at all times.The 10 inputs are embedded into the PLD.This PLD is programmed with a 20 termination.There can be a subcategory Programmable Logic Devices applied to it.There are 5V supplies in the Programmable logic device.64' indicates how many product terms there are.Several 8 outputs can be found.20 pins on the board are used for specific purposes.Programmable logic devices are currently working at a temperature of 75°C.Programmable logic devices are at 5.25V (Vsup) that the maximum Supply Voltage is attained.In order for Vsup to be higher than 4.75V, the Supply Voltage ought to be higher.There is a frequency of 50MHz in the clock of the Programmable logic devices.
TIBPAL16L8-15CN Features
Mounting type of Through Hole
Input voltage of 5V
6 I/Os
50MHz clock frequency
TIBPAL16L8-15CN Applications
There are a lot of Texas Instruments TIBPAL16L8-15CN PLDs (Programmable Logic Device) applications.
- Microcomputer systems
- Highly complex logic
- Power-limited applications
- Industrial
- High performance applications
- High-end communication equipment
- high-performance microcomputer systems
- Battery operated devices
- Software
- Electrically Devices