THS4504DGK
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 23.303308mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4504 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 16mA |
| Nominal Supply Current | 20mA |
| Power Dissipation | 385mW |
| Slew Rate | 1800V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 4μA |
| Max Input Voltage | -2.7V |
| Voltage - Supply, Single/Dual (±) | 4.5V~15V ±2.25V~7.5V |
| Output Current per Channel | 130mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 260MHz |
| Gain Bandwidth Product | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 210000 kHz |
| Voltage Gain | 54dB |
| Average Bias Current-Max (IIB) | 5.2μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 4mV |
| Settling Time | 20 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 20MHz |
| Bias Current-Max (IIB) @25C | 4.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | -7mV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4504DGK Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Differential-types. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 7mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 16mA . There should be no change in the voltage gain. Op amp has total of 1 elements. Linear amplifier resistance should stay within the range of 10MOhm.
THS4504DGK Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm
THS4504DGK Applications
There are a lot of Texas Instruments THS4504DGK Instrumentational OP Amps applications.
- Scintillation detectors
- Communication
- Tablets
- Navigation
- Measurements of Wheatstone bridge
- Television broadcasting equipment
- Logarithmic operation circuits
- Signal amplification
- Thermocouples
- High gain DC amplifier