THS4021IDGNR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4021 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 7.8mA |
| Nominal Supply Current | 10mA |
| Power Dissipation | 2.14W |
| Slew Rate | 470V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 350MHz |
| Gain Bandwidth Product | 3.5 GHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3500000 kHz |
| Voltage Gain | 90.88dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 40 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 70MHz |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Input Offset Current-Max (IIO) | 0.25μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4021IDGNR Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. A Voltage Feedback-type buffer amplifier is shown here. The op amp is delivered to you in a Cut Tape (CT) case. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this op amp is a type of Operational Amplifier device. Linear amplifier includes 8 pins. The input offset voltage is 2mV. Surface Mount is the recommended mounting type for this linear amplifier. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 7.8mA and 10 . It is a member of the 90.88dB's 90.88dB family. It is possible to count 1 elements on this buffer amplifier. A TR-shaped amplifier is used to pack the buffer amps.
THS4021IDGNR Features
8 Pins
supply voltage of 15V
90.88dB voltage gain
THS4021IDGNR Applications
There are a lot of Texas Instruments THS4021IDGNR Instrumentational OP Amps applications.
- Portable media players
- Inverse/same-phase proportional circuit
- PDA
- Multiplication circuits
- Navigation
- pH (acidity)
- Mobile phone
- Large motor controllers
- Power transmission
- Portable docking station