TFS759HG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 16-SSIP, 12 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | HiperTFS® |
| JESD-609 Code | e3 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 280W |
| Max Power Dissipation | 280W |
| Number of Outputs | 1 |
| Output Voltage | 400V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 11.1V~13.4V |
| Output Power | 309W |
| Control Features | EN |
| Topology | Flyback, Forward |
| Min Input Voltage | 100V |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 400V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 530V 725V |
| Voltage - Start Up | 12.1V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 400V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TFS759HG Overview
A ac to dc converter of the package 16-SSIP, 12 Leads, Exposed Pad, Formed Leads contains the ac to dc converter.The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, the analog IC type is DUAL SWITCHING CONTROLLER .When the switching frequency reaches 66kHz , the circuit is closed.A range of 11.1V~13.4V supply voltages (Vcc/Vdd) can be used.In this ac/dc converter, there are 16 pins.It is a member of HiperTFS? manufacturer family.A total of 1 outputs need to be run.The output voltage of the AC/DC converter is 400V .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 400V .A coverter produces 309W watts of output power.The AC to DC inverter can be used with an input voltage of less than 100V V.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 400V .
TFS759HG Features
Packaged with 16-SSIP, 12 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz
With 16 pins
TFS759HG Applications
There are a lot of Power Integrations TFS759HG AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Consumer electronics
- Battery chargers for smart phones
- RCC SMPS
- DVD players
- Z-Wave
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Standby Power Supplies
- Remotely-controlled appliances
- Low-Voltage I/O System Power