TC9402CPD
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.620005g |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Volt to Frequency and Frequency to Volt |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Special Function Converters |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | TC9402 |
| Pin Count | 14 |
| Output Voltage | 23V |
| Operating Supply Voltage | 12V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 8V |
| Supply Type | Dual, Single |
| Bandwidth | 100 kHz |
| Resolution | 1.625 B |
| Max Dual Supply Voltage | 7.5V |
| Power Consumption | 27mW |
| Linearity | ±0.25% |
| Min Dual Supply Voltage | 4V |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Positive Input Voltage-Max | 5V |
| Negative Input Voltage-Max | -2V |
| Full Scale | ±100ppm/°C |
| Height | 3.3mm |
| Length | 19.05mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC9402CPD Overview
It is included in the 14-DIP (0.300, 7.62mm) package. The electronic part is mounted in the direction of Through Hole. It is packaged in the way of Tube. Volt to Frequency and Frequency to Volt is the type of electrical device. It is possible to terminate a transmission line with a 14 termination, which is an end device that matches the line's characteristic impedance. The device is equipped with a pin count of 14. Power is provided to the device by a supply voltage of 5V. It is possible to identify related parts based on the base part number. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. It operates with the minimal operating temperature of 0°C to ensure its reliability. To ensure the reliability of the device, the maximum operating temperature is 70°C. There is a mounting in the way of Through Hole. In Analog Special Function Converters, this part is included. The supply voltage (Vsup) should be greater than 8V if it is suitable for use. Currently, the maximum supply voltage (Vsup) reaches 15V. It operates with the frequency of 100kHz. This electrical device is powered by 12V voltage. Power is supplied by a dual supply voltage of 5V. The type of supply for this electronic component is Dual, Single. An electronic part with a negative input type of -2V has the maximum negative input type. Support is provided for the output voltage of 23V. 100 kHz represents the bandwidth of the electrical device.
TC9402CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9402CPD Applications
There are a lot of Microchip Technology TC9402CPD V/F & F/V Converters applications.
- Speedometers
- 13-bit Analog-to-Digital Converters (ADC)
- Fm analog signal mod/d emod
- Automotive Sensing
- FM Demodulation
- Battery Monitoring
- Microprocessor Data Acqusition
- Touch or Sound Switches
- Hand-Held Tachometers
- Motor Control