TC9400CPD
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Volt to Frequency and Frequency to Volt |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | TC9400 |
| Pin Count | 14 |
| Output Voltage | 18V |
| Max Output Current | 10mA |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Interface | Analog |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 8V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 730mW |
| Max Output Voltage | 6.5V |
| Bandwidth | 100 kHz |
| Resolution | 1.625 B |
| Max Dual Supply Voltage | 7.5V |
| Power Consumption | 27mW |
| Linearity | ±0.05% |
| Min Dual Supply Voltage | 4V |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Positive Input Voltage-Max | 5V |
| Negative Input Voltage-Max | -2V |
| Full Scale | ±40ppm/°C |
| Height | 4.95mm |
| Length | 19.69mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC9400CPD Overview
It is embedded in the 14-DIP (0.300, 7.62mm) package. Located in Through Hole, this electronic component is mounted. It is packaged in the way of Tube. Currently, an electrical device of type Volt to Frequency and Frequency to Volt is being used. As an alternative to 14 terminations, there are devices that match the characteristic impedance of transmission lines. The device is equipped with a 14 pin count. An electrical supply of voltage 5V supplies power to the device. It is possible to identify related parts based on the base part number. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. Mounted in the direction of Through Hole. The supply voltage (Vsup) should be greater than 8V if it is suitable for use. There is a maximal supply voltage (Vsup) reaching 15V. The frequency of operation is 100kHz. It is powered by a dual supply voltage of 5V. Input type -2V is the maximum negative input type for this electronic part. It supports the output voltage of 18V. This electrical device has a bandwidth of 100 kHz.
TC9400CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9400CPD Applications
There are a lot of Microchip Technology TC9400CPD V/F & F/V Converters applications.
- Analog Data Transmission and Recording
- Horn Control
- Automotive Door L ock Control
- Integrating a/d converter
- FM Demodulation
- Touch or Sound Switches
- Motor Control
- Frequency Meters/Tachometer
- Low-Cost Analog-to-Digital Conversion
- Serial frequency output