TC7WT126FUTE12LF
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 8 |
| Packaging | Tape and Reel |
| Published | 2010 |
| Number of Terminations | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 33 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 48 ns |
| Family | HST/T |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Control Type | ENABLE HIGH |
| RoHS Status | RoHS Compliant |
TC7WT126FUTE12LF Overview
Logical driver uses a neat SSOP package. Tape and Reel external packaging. All of the 2 elements are put into use. 8 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Transceiver shares the HST/T family's comprehensive benefits and features. 8 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 8 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 2μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 6mA to its low level. In high level output mode, the electronic parts may conduct -6mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS TRANSCEIVER logic IC.
TC7WT126FUTE12LF Features
Bus Driver/Transceivers
High Level Output: 6mA
Low Level Output: -6mA
BUS TRANSCEIVER Logic IC
TC7WT126FUTE12LF Applications
There are a lot of Toshiba TC7WT126FUTE12LF Buffers & Transceivers applications.
- Broadcast application
- Precision geodetic measurement
- Switching system
- Single fiber bidirectional application
- interconnection between computers
- Laser diode bonding
- Bar, KTV wireless entertainment
- Fiber-to-the-desktop
- AV receiver
- Desktop PC