TC7WH74FU(TE12L)
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2009 |
| Series | 7WH |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Base Part Number | 7WH74 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Power Supplies | 2/5.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Max Frequency@Nom-Sup | 45000000Hz |
| RoHS Status | Non-RoHS Compliant |
TC7WH74FU(TE12L) Overview
The flip flop is packaged in a case of 8-TSSOP, 8-MSOP (0.110, 2.80mm Width). A package named Digi-Reel?includes it. There is a Differentialoutput configured with it. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2V~5.5V is required for operation. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 7WHseries FPGA. A frequency of 115MHzshould not be exceeded by its output. A total of 1elements are contained within it. As a result, it consumes 2μA quiescent current and is not affected by external forces. In 8terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 7WH74family includes it. This JK flip flop has a 4pFfarad input capacitance. The part you are looking for is included in FF/Latches. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch operates on 2/5.5V volts.
TC7WH74FU(TE12L) Features
Digi-Reel? package
7WH series
2/5.5V power supplies
TC7WH74FU(TE12L) Applications
There are a lot of Toshiba Semiconductor and Storage TC7WH74FU(TE12L) Flip Flops applications.
- Common Clocks
- Buffered Clock
- Memory
- Shift Registers
- EMI reduction circuitry
- ESD protection
- Set-reset capability
- Cold spare funcion
- Communications
- Asynchronous counter