TC74VHC574FK(EL,K)
| Parameters | |
|---|---|
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 115MHz |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 14 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 20-VSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Series | TC74VHC |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~5.5V |
| Function | Standard |
TC74VHC574FK(EL,K) Overview
As a result, it is packaged as 20-VFSOP (0.118, 3.00mm Width). The Cut Tape (CT)package contains it. Currently, the output is configured to use Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis used as the supply voltage. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the TC74VHC series. It should not exceed 115MHzin terms of its output frequency. A total of 1 elements are present. There is a consumption of 40μAof quiescent energy. Its input capacitance is 4pF farads.
TC74VHC574FK(EL,K) Features
Cut Tape (CT) package
TC74VHC series
TC74VHC574FK(EL,K) Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHC574FK(EL,K) Flip Flops applications.
- Balanced 24 mA output drivers
- Registers
- Counters
- Shift registers
- Circuit Design
- Frequency Dividers
- Bounce elimination switch
- Load Control
- Individual Asynchronous Resets
- Test & Measurement