TC74VHC299FTEL
| Parameters | |
|---|---|
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | TC74VHC |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 2V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC299 |
| Function | Universal |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 25.5 ns |
| Family | AHC/VHC |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 6.5mm |
TC74VHC299FTEL Overview
20-TSSOP (0.173, 4.40mm Width) is the package in which the device is embedded. The number of the chip's terminations sums up to 20. Presented in a case of Tape & Reel (TR). 5V is the part's operating supply voltage. 1 elements make up this part. 20 pins are located on the device. The recommended mounting method is Surface Mount. Electronic components fall under the category of AHC/VHC. Surface Mount is the way this component is mounted. A temperature range of -40°C~85°C is used for operation. Votage is supplied within 2V~5.25V. The TC74VHC series represents this electrical component. You can search for similar parts based on the 74VHC299 family. There are also the following additional considerations in this section: HOLD MODE. There must be a minimum supply voltage (Vsup) of 2V for this part. The device is capable of delivering voltage at 2/5.5V. It should not exceed 5.5V in terms of the supply voltage (Vsup).
TC74VHC299FTEL Features
With 20 pins
Mounted in Surface Mount type.
Based on 74VHC299 family
It supplies 2/5.5V power
TC74VHC299FTEL Applications
There are a lot of Toshiba Semiconductor and Storage TC74VHC299FTEL Shift Registers applications.
- Remote control holding register
- data manipulation
- Generate time delay toward digital circuits
- Data manipulation
- Delay Line
- Counter
- Serial to parallel converter
- Sequence generator
- Remote control holding register
- temporary data storage