TC74LCX74FT(EL)
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| Published | 2014 |
| Series | 74LCX |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74LCX74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| RoHS Status | Non-RoHS Compliant |
TC74LCX74FT(EL) Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. It is contained within the Digi-Reel?package. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. In this case, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LCX series. You should not exceed 150MHzin its output frequency. The list contains 2 elements. Despite external influences, it consumes 10μAof quiescent current. The number of terminations is 14. If you search by 74LCX74, you will find similar parts. An input voltage of 3.3Vpowers the D latch. The input capacitance of this JK flip flopis 7pF farads. The part is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It operates from 3.3V power supplies.
TC74LCX74FT(EL) Features
Digi-Reel? package
74LCX series
3.3V power supplies
TC74LCX74FT(EL) Applications
There are a lot of Toshiba Semiconductor and Storage TC74LCX74FT(EL) Flip Flops applications.
- Event Detectors
- Control circuits
- Buffer registers
- Count Modes
- Common Clocks
- Power down protection
- Convert a momentary switch to a toggle switch
- Bus hold
- Memory
- Dynamic threshold performance