TC74LCX373FT(EL)
| Parameters | |
|---|---|
| Base Part Number | 74LCX373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Digi-Reel® |
| Published | 1998 |
| Series | 74LCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
TC74LCX373FT(EL) Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. As a result, it has a packaging of Digi-Reel?. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. 74LCX is the series number of this FPGA. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. 74LCX373 is its family. It operates with a supply voltage of 3.3V. It is equipped with 20 pin count. It is a member of the LVC/LCX/Z family of electronic devices. 20 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 3.6V. The device is powered by 3.3V power supplies. As a result of its reliable performance, it is well suited for TAPE AND REEL.
TC74LCX373FT(EL) Features
20-TSSOP (0.173, 4.40mm Width) package
74LCX series
8 Bits
74LCX373 family
20 pin count
20 pins
3.3V power supplies
TC74LCX373FT(EL) Applications
There are a lot of Toshiba Semiconductor and Storage TC74LCX373FT(EL) Latches applications.
- Frequency dividing
- Automotive Infotainment
- Parallel data storage
- Up-Down Johnson
- Data acquisition
- Buffer/Storage Registers
- Shift Registers
- Pattern Generators
- Avionics
- Display driver