Parameters |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
8.3 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
13 ns |
Logic Function |
Buffer, Inverting |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.024 A |
Prop. Delay@Nom-Sup |
9.5 ns |
High Level Output Current |
24mA |
Low Level Output Current |
24mA |
Control Type |
ENABLE LOW |
Height |
3.5mm |
Length |
24.6mm |
Width |
6.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Through Hole |
Package / Case |
DIP |
Number of Pins |
20 |
Published |
1996 |
Part Status |
Active |
Number of Terminations |
20 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Polarity |
Non-Inverting |
TC74ACT541P(F) Overview
Logical driver uses a neat DIP package. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. It is generally sold in TUBE package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct 24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a BUS DRIVER logic IC.
TC74ACT541P(F) Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: 24mA
BUS DRIVER Logic IC
TC74ACT541P(F) Applications
There are a lot of Toshiba TC74ACT541P(F) Buffers & Transceivers applications.
- Broadcast application
- Wireless communication
- Military satellite communications
- Metro access rings
- Bar, KTV wireless entertainment
- Switching system
- Wireless modems
- Indoor ad hoc meeting
- AV receiver
- Carrier phase observations