TC74AC273F(EL,F)
| Parameters | |
|---|---|
| Factory Lead Time | 14 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Series | TC74AC |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDSO-G20 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Power Supplies | 3.3/5V |
| Load Capacitance | 50pF |
| Clock Frequency | 150MHz |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Max Frequency@Nom-Sup | 55000000Hz |
| RoHS Status | RoHS Compliant |
TC74AC273F(EL,F) Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). A package named Cut Tape (CT)includes it. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the TC74AC series. You should not exceed 150MHzin its output frequency. A total of 1elements are contained within it. As a result, it consumes 80μA quiescent current and is not affected by external forces. There are 20 terminations,This JK flip flop has a 5pFfarad input capacitance. There is a base part number FF/Latchesfor the RS flip flops. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 3.3/5Vis required to operate it.
TC74AC273F(EL,F) Features
Cut Tape (CT) package
TC74AC series
3.3/5V power supplies
TC74AC273F(EL,F) Applications
There are a lot of Toshiba Semiconductor and Storage TC74AC273F(EL,F) Flip Flops applications.
- Data storage
- Frequency Divider circuits
- Balanced Propagation Delays
- Bounce elimination switch
- Count Modes
- Common Clocks
- CMOS Process
- Data transfer
- Matched Rise and Fall
- Latch