TC4432EOA
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4432 |
| Pin Count | 8 |
| Output Voltage | 29.2V |
| Max Output Current | 1.5A |
| Power Supplies | 4.5/30V |
| Nominal Supply Current | 4mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 4mA |
| Propagation Delay | 90 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 90 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 50 ns |
| Rise / Fall Time (Typ) | 25ns 33ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Height | 1.42mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4432EOA Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is indicated.This device is equipped with 1 drivers for its configuration.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a power supply voltage of 4.5V~30V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel, P-Channel MOSFET gate.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is used as the input type in this program.There are 8 terminations to form the base of its configuration.Many related parts can be found under its base part number TC4432.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.An output current as high as 1.5A can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has a total of 8 component pins.Mosfet gate drivers supports a current output of 1.5A.470mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.To ensure high stability, the supply current should be kept at 4mA.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 4.5/30V.In this case, the voltage is 29.2V.
TC4432EOA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4432EOA Applications
There are a lot of Microchip Technology TC4432EOA gate drivers applications.
- Solar power supplies
- Line drivers
- RGB applications
- Multicolor LED/laser displays
- Refrigerator
- Isolated Supplies for controller area network (CAN),
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- 3-Phase Motor Inverter Driver
- High-speed communications