TB67S149HG
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 25-SIP Formed Leads |
| Number of Pins | 25 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tray |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 3.2W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 84V |
| Operating Supply Voltage | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 2.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Logic Function | AND |
| Voltage - Load | 10V~40V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1 ~ 1/32 |
| Height Seated (Max) | 19.37mm |
| Length | 28.8mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
TB67S149HG Overview
The design contains a Traypackage.The part is packaged in a 25-SIP Formed Leads case.Drivers controllers is recommended to mount the part by Through Hole.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 4.75V~5.25V volts.The operating temperature ranges from -20°C~85°C TAto -20°C~85°C TA.The part has 25terminations available.Drivers controllers is possible to apply voltage at a rate of 10V~40Vto the load.I would like to remind you that this amplifier should be operated at 5V.The recommended way to mount it is Through Hole.Maintain a current of 3Afor the part output.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.The device has 25 pins.The driver is powered by a 5.25Vvolt supply.84Vis maintained as the output voltage.In order to operate it, 2.5mAsupply current is used.
TB67S149HG Features
Applications : General Purpose
Load voltage across the chip 10V~40V
TB67S149HG Applications
There are a lot of Toshiba Semiconductor and Storage TB67S149HG motor drivers applications.
- Accurate LED current matching
- Automotive exterior and interior lighting
- Architectural lighting
- Hazardous application
- Horticultural lighting
- Indicator
- High brightness LED lighting
- Dash
- CHMSL (center high-mount stop lamps)
- Camera-enabled smartphones