TB67S141HG
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 25-SIP Formed Leads |
| Surface Mount | NO |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tray |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 25 |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PZIP-T25 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Voltage - Load | 10V~40V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height Seated (Max) | 19.37mm |
| Length | 28.8mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
TB67S141HG Overview
The design includes a package of type [0].This part is packaged with a case of [0].Drivers controllers is recommended that the part be mounted by Through Hole.For the component connected to [0], it is suitable.Drivers controllers is capable of supplying 4.75V~5.25V volts.Regarding the operating temperature, it is in the range of -20°C~85°C TA°C.This part has 25termination options.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to remember that this amplifier should be run at 5V.Keep the part output current at 3A.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.
TB67S141HG Features
Applications : General Purpose
Load voltage across the chip 10V~40V
TB67S141HG Applications
There are a lot of Toshiba Semiconductor and Storage TB67S141HG motor drivers applications.
- Digital still cameras
- RGB and monochromatic LED drivers for signage and traffic signals
- Charge pump circuits
- Tunnel lights
- Running preventive- maintenance diagnostics
- Hidden coves in high-end residential settings
- Large outdoor LED display
- Step-up or step-down driver topologies
- CHMSL (center high-mount stop lamps)
- Outdoor area lights