T6819-TBQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 57.5/40V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Output Current per Channel | 1.5A |
| Interface IC Type | SIPO BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 6 |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 2A |
| Turn Off Time | 20 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Supply Voltage1-Min | 7.5V |
| Supply Voltage1-Max | 40V |
| Length | 9.925mm |
| Width | 3.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
T6819-TBQ Overview
As part of the SOIC package, it is included.Hot-swappable device comes in the shape of a Cut Tape (CT).In total, it has 16 terminations.Its terminal position is DUAL.Total number of pins is 16.High efficiency can be achieved with a voltage supply of 5V.A 16 pin is used for operation.Peripheral Drivers contains this gadget on its own.There is a Surface Mount-axis orientation to it.The maximum operating temperature of 150°C°C allows for stable operation.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.To ensure normal operation, the supply voltage (Vsup) must be kept above 4.75V.Hot-swappable device is set to 5.25V (maximum supply voltage).As far as the power supplies are concerned, the part has the character 57.5/40V.By default, output 6 is selected.To meet the operation criteria, the maximum output current drops to 2A.500mOhm resistance is present in the device.
T6819-TBQ Features
The terminal position of 16
T6819-TBQ Applications
There are a lot of Atmel (Microchip Technology) T6819-TBQ hot swap controllers applications.
- Base station power distribution system
- Data communication systems
- Switch
- Network switches
- Undervoltage protection
- Circuit power protectors
- Networking
- Base station
- Circuit breakers for electronic circuits
- Telecommunications