T1014NXN7PQA
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Package / Case | 780-FBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Published | 2006 |
| Series | QorIQ T1 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 780 |
| ECCN Code | 3A991.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PBGA-B780 |
| Supply Voltage-Max (Vsup) | 1.03V |
| Supply Voltage-Min (Vsup) | 0.97V |
| Speed | 1.4GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e5500 |
| Clock Frequency | 133.33MHz |
| Bit Size | 64 |
| Address Bus Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 64 |
| Integrated Cache | YES |
| Ethernet | GbE (8) |
| Number of Cores/Bus Width | 1 Core 64-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR3L, DDR4 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | I2C, MMC/SD, PCIe, SPI, UART |
| Security Features | Boot Security, Cryptography, Secure Fusebox, Secure Debug, Tamper Detection, Volatile key Storage |
| SATA | SATA 3Gbps (2) |
| Height Seated (Max) | 2.07mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
T1014NXN7PQA Overview
Since the microprocessor is packed in 780-FBGA, shipping overseas is convenient. CPUs have 1 Core 64-Bit cores/bus width. K-40°C~105°C TAw what the operating temperature is around -40°C~105°C TA. It comes from the QorIQ T1 series. With a core count of PowerPC e5500, this CPU is multicore. There are DDR3L, DDR4 RAM controllers on this CPU. Featuring I2C, MMC/SD, PCIe, SPI, UART interfaces, this microprocessor can better serve you. A MICROPROCESSOR, RISC represents the uPs/uCs/Peripheral ICs type. Total terminations are 780. The microprocessor should be turned on and run with a voltage supply of 1V volts. The architecture of the microprocessor is 64-bit. It can supply a maximum current of 1.03V. Its external data bus width is 64. 133.33MHz is the clock frequency of the embedded microprocessor.
T1014NXN7PQA Features
PowerPC e5500 Core
64-Bit Structure
T1014NXN7PQA Applications
There are a lot of NXP USA Inc. T1014NXN7PQA Microprocessor applications.
- Process control devices
- Instrumentation and process control field
- Set-top boxes
- Nintendo
- Measurement and control field
- Process control devices
- Switches
- Glucose monitoring systems (for Type 1 Diabetes)
- Speed meter
- Ipad