SY55852UKG
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Supplier Device Package | 10-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | SY55 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.3V~5.7V |
| Frequency | 2.5GHz |
| Base Part Number | SY55852 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 5.7V |
| Min Supply Voltage | 2.3V |
| Number of Bits | 1 |
| Clock Frequency | 2.5GHz |
| Propagation Delay | 500 ps |
| Quiescent Current | 36mA |
| Turn On Delay Time | 400 ps |
| Logic Function | D-Type |
| Current - Quiescent (Iq) | 36mA |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
SY55852UKG Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width)is the packaging method. Package Tubeembeds it. It is configured with Differentialas an output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 2.3V~5.7V. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the SY55series contain this type of chip. Its output frequency should not exceed 2.5GHz. The element count is 1 . During its operation, it consumes 36mA quiescent energy. JK flip flop belongs to SY55852 family. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 10. Its clock edge trigger type is Positive Edge. The flip flop is designed with 1bits. Quiescent current is consumed by the D latch in the amount of 36mA. Operating temperatures should be lower than 85°C. If the operating temperature is higher than -40°C, the system should operate properly. Despite its minimal supply voltage of 2.3V, it is capable of operating. 5.7Vis its maximum supply voltage. The frequency can be set to 2.5GHz.
SY55852UKG Features
Tube package
SY55 series
10 pins
1 Bits
SY55852UKG Applications
There are a lot of Microchip Technology SY55852UKG Flip Flops applications.
- Buffer registers
- Differential Individual
- Data storage
- Patented noise
- Reduced system switching noise
- Counters
- ESD performance
- Computers
- High Performance Logic for test systems
- Bounce elimination switch