SY10EP52VKG-TR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 10EP |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | NECL MODE OPERATING RANGE: VCC=0V, VEE=-3.3V TO -5.5V |
| Technology | ECL |
| Voltage - Supply | -3.3V~-5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 10EP52 |
| JESD-30 Code | S-PDSO-G8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Bits | 1 |
| Clock Frequency | 4GHz |
| Family | 10E |
| Current - Quiescent (Iq) | 47mA |
| Output Polarity | COMPLEMENTARY |
| Trigger Type | Positive, Negative |
| Propagation Delay (tpd) | 0.38 ns |
| fmax-Min | 4000 MHz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
SY10EP52VKG-TR Overview
It is packaged in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Differential. There is a trigger configured with Positive, Negative. It is mounted in the way of Surface Mount. The supply voltage is set to -3.3V~-5V. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 10EP series. Its output frequency should not exceed 4GHz. In total, it contains 1 elements. This process consumes 47mA quiescents. Currently, there are 8 terminations. D latch belongs to the 10EP52 family. A voltage of 3.3V is used to power it. It is a member of the 10Efamily of D flip flop. An electronic part with 1bits has been designed. The maximal supply voltage (Vsup) reaches 3.63V. A normal operating voltage (Vsup) should remain above 2.97V. Furthermore, it has NECL MODE OPERATING RANGE: VCC=0V, VEE=-3.3V TO -5.5Vas a characteristic.
SY10EP52VKG-TR Features
Tape & Reel (TR) package
10EP series
1 Bits
SY10EP52VKG-TR Applications
There are a lot of Microchip Technology SY10EP52VKG-TR Flip Flops applications.
- ESD protection
- Computing
- Shift Registers
- ATE
- Set-reset capability
- CMOS Process
- Dynamic threshold performance
- Common Clocks
- Balanced Propagation Delays
- Modulo – n – counter