SY100EL34LZG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 100EL, Precision Edge® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Clock Generator |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | ECL |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SY100EL34 |
| Output | Clock |
| Number of Outputs | 3 |
| Number of Circuits | 1 |
| Operating Supply Current | 49mA |
| Propagation Delay | 1.2 ns |
| Turn On Delay Time | 1.2 ns |
| Input | ECL, PECL |
| Ratio - Input:Output | 1:3 |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.05 ns |
| Height | 1.48mm |
| Length | 9.93mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
SY100EL34LZG Overview
As a clock IC, PLLs is packaged using the Tube method. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain a maximum temperature of 260 during reflowing. In it, there are 16 terminations to be found. This Clock PLL will be fed by ECL, PECL as its input. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As long as there are 3V~5.5V supply voltages provided, clock generator ic should work. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. The RF synthesizer is compatible with Clock logic levels. This electronic component is usually classified as a Clock Generator component. Related electrical parts can be found for the base part number SY100EL34. There are a number of 16 pins that are available on the frequency synthesizers. This electronic part is a member of the 100EL, Precision Edge? series. The frequency synthesizer features 3 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.05 ns max. For the RF synthesizer to function properly, a supply current of 49mA must be provided.
SY100EL34LZG Features
Available in the 16-SOIC (0.154, 3.90mm Width)
SY100EL34LZG Applications
There are a lot of Microchip Technology SY100EL34LZG Clock Generators applications.
- Automatic control system test
- Wide area power system
- Vector network analyzers (VNA)
- Time to digital converters
- 1 Gigabit Ethernet
- Multiplexing communication
- Microwave radio
- Wireless base station for LTE, LTE-advanced
- CPUs
- Infotainment systems