STPIC6A259MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | ST PIC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | STPIC6 |
| Pin Count | 24 |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 30pF |
| Number of Bits | 1 |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | D-Type, Latch |
| Output Characteristics | OPEN-DRAIN |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STPIC6A259MTR Overview
24-SOIC (0.295, 7.50mm Width) contains it. Packaged in the way of Cut Tape (CT). It uses Standard as the output. D-Type, Addressable is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. The operating temperature is -40°C~125°C. An FPGA in this series belongs to the ST PIC family. The design of this electronic part is based on 1 bits. A device such as this has 24 terminations designed. STPIC6 is its family. It operates with a supply voltage of 5V. There are 24 pins attached to it. This board has 24 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. This part can be found within the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. There are 5V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 4.5V. Its reliable performance makes it an excellent choice for TAPE AND REEL. In order to achieve its superior flexibility, 8 circuits are used.
STPIC6A259MTR Features
24-SOIC (0.295, 7.50mm Width) package
ST PIC series
1 Bits
STPIC6 family
24 pin count
24 pins
5V power supplies
STPIC6A259MTR Applications
There are a lot of STMicroelectronics STPIC6A259MTR Latches applications.
- Stacked or Push-Down Registers
- Shift left with parallel loading
- Ring counter
- Serial Output Register
- Double bus register system
- Watches
- General-Purpose Register
- High-speed logic
- BCD counting
- Serial Output Data Queuing