STMPS2252TTR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 115MOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STMPS2252 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 105m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 105mOhm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2252TTR Overview
Cut Tape (CT) is how it's packaged.It's included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The lighting driver has a total of 2 outputs that are available for use.Operation is based on a supply voltage of Not Required.It is part of the STMPS2252 family of LED drivers.It consists of 8 terminations in total.In order to operate, 8 pins are used.There are 1 functions of the LED driver.To meet the operation criteria, the maximum output current drops to 500mA.High efficiency is possible at 5V supply voltage.Surface Mount is mounted in the way of this LED driving board.A total of 8 pins are included in this LED driver.In this LED driving board, there is 115MOhm resistance.This results in a 500mA output current.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 2 channels.A supply voltage of 5.5V is recommended for maximum efficiency.This LED driver can handle voltages up to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
STMPS2252TTR Features
Supplied from 5V
Resistance of 115MOhm
2 channels
STMPS2252TTR Applications
There are a lot of STMicroelectronics STMPS2252TTR Power Switches ICs applications.
- Portable/Handheld Devices
- Hot-Swap Systems
- HDD and SSD
- Hot Swaps
- USB Power Distribution
- Wireless/Networking Cards
- Mobile Communication Devices
- Hard Disk Drives
- Handheld Devices
- Hot Swap