STM32F411RET6
| Parameters | |
|---|---|
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | I2C, IrDA, LINbus, MMC/SD/SDIO, SPI, UART/USART, USB OTG |
| Supply Current-Max | 34.5mA |
| Bit Size | 32 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M4 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 16 |
| Number of External Interrupts | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Max Power Dissipation | 313mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Base Part Number | STM32F411 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, MMC, SD, SDIO, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
Description
The STM32F411RET6 devices are built around the high-performance Arm? Cortex?-M4 32-bit RISC processor, which runs at up to 100 MHz. All Arm single-precision data-processing instructions and data formats are supported by the Cortex?-M4 core's Floating point unit (FPU) single precision. It also includes a memory protection unit (MPU) and a full set of DSP commands to improve application security.
The STM32F411RET6 has a large number of upgraded I/Os and peripherals connected to two APB buses, two AHB buses, and a 32-bit multi-AHB bus matrix, as well as high-speed embedded storage (up to 512 Kbytes of Flash memory and 128 Kbytes of SRAM).
Features
? Clock, reset and supply management
– 1.7 V to 3.6 V application supply and I/Os
– POR, PDR, PVD and BOR
– 4-to-26 MHz crystal oscillator
– Internal 16 MHz factory-trimmed RC
– 32 kHz oscillator for RTC with calibration
– Internal 32 kHz RC with calibration
? Power consumption
– Run: 100 μA/MHz (peripheral off)
– Stop (Flash in Stop mode, fast wakeup time): 42 μA Typ @ 25C; 65 μA max @25 °C
– Stop (Flash in Deep power down mode, slow wakeup time): down to 9 μA @ 25 °C; 28 μA max @25 °C
– Standby: 1.8 μA @25 °C / 1.7 V without RTC; 11 μA @85 °C @1.7 V
– VBAT supply for RTC: 1 μA @25 °C
? 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
? General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
? Dynamic Efficiency Line with BAM (Batch Acquisition Mode)
– 1.7 V to 3.6 V power supply
– - 40°C to 85/105/125 °C temperature range
? Core: Arm? 32-bit Cortex?-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
? Memories
– Up to 512 Kbytes of Flash memory
– 128 Kbytes of SRAM
Applications
? Alarm systems, video intercom, and HVAC
? Home audio appliances
? Mobile phone sensor hub
? Motor drive and application control
? Medical equipment
? Industrial applications: PLC, inverters, circuit breakers
? Printers, and scanners