STK681-210-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SIP, 11 Leads |
| Number of Pins | 12 |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| Max Output Current | 8A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Output Current per Channel | 5.2A |
| Supply Current-Max (Isup) | 8mA |
| Voltage - Load | 10V~42V |
| Current - Output / Channel | 5.2A |
| Load Type | Inductive |
| Height Seated (Max) | 29.1mm |
| Length | 29.5mm |
| Width | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
STK681-210-E Overview
Tube is used for packaging.A cost-saving measure, H bridge is included in 12-SIP, 11 Leads.Based on the supply voltage of 4.75V~5.25V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place according to the way of Through Hole.A normal operation of 150°C TJ is enabled by motor driver H bridges operating temperature.Among H bridge motor drivers many applications are DC Motors, General Purpose.On PCBs, Through Hole mounts H gate.Transmission lines are terminated with 12 terminations with the H bridge that matches their characteristic impedance.A signal interface uses 12 pins as pronged contacts.The H bridge is powered by a voltage supply of 5V.H bridge circuit incorporates STEPPER MOTOR CONTROLLER as its analog IC type.At a specified ambient temperature, the maximum load current that the power supply can provide is 8A.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.An electrical load is supplied with power from 524V.
STK681-210-E Features
Available in 12-SIP, 11 Leads Package / Case
Operating Temperature at the range of Through Hole
STK681-210-E Applications
There are a lot of ON Semiconductor STK681-210-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Networking Microprocessor Voltage Regulators
- Quad DC motor
- Industrial Automation
- DC-DC Converters
- Notebook Computers
- V-Core
- High current, low profile DC-DC converters
- Compact Blade Servers
- Small Form-Factor Voltage Regulator Modules
- Dual DC motor