STK672-610
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 9mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 10.2W |
| Current - Output | 3.3A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 3A |
| Voltage - Load | 10V~42V |
| Switching Frequency | 45kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height | 14.4mm |
| Length | 29.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | LIFETIME (Last Updated: 2 weeks ago) |
STK672-610 Overview
There is a Tubepackage included in the design.There is 19-SSIP Formed Leads case included with the part.In most cases, it is recommended to mount the part at Through Hole.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 4.75V~5.25V volts.This device operates at a temperature of 0°C~105°C TC.A total of 19terminations are available in the part.Voltage can be applied at a rate of 10V~42V volts to the load.You should run this amplifier at 5V.Through Holeis its recommended mounting method.Maintain a 3.3Aoutput current for the part.19pins are available on the device.This is part of the Motion Control Electronics series.Steppercan be recognized as a motor type.
STK672-610 Features
Applications : General Purpose
Load voltage across the chip 10V~42V
Motor Type classified as Stepper
STK672-610 Applications
There are a lot of ON Semiconductor STK672-610 motor drivers applications.
- Home lighting systems
- Alternative to HID lights
- Lighting for health and wellbeing
- Hospitality buildings
- Indicator circuit
- Brake lights
- Handheld devices
- Mobile phone display backlight and key light driving
- parking lights
- LED bias