STCS2ASPR

STCS2ASPR

PMIC STCS2 10 Pin 12V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-STCS2ASPR
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 334
  • Description: PMIC STCS2 10 Pin 12V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Output Current 2A
Max Supply Current 3μA
Output Current per Channel 2A
Internal Switch(s) Yes
High Level Output Current 2A
Low Level Output Current 1mA
Dimming PWM
Number of Segments 1
Voltage - Supply (Min) 4.5V
Multiplexed Display Capability NO
Height Seated (Max) 3.7mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 4 Weeks
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Type Linear
Subcategory Display Drivers
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 12V
Base Part Number STCS2
Pin Count 10
Number of Outputs 1
Max Supply Voltage 40V
Min Supply Voltage 4.5V

STCS2ASPR Overview


On the board, there is also a PowerSO-10 Exposed Bottom Pad package that saves space.Typically, LED drivers have 1 outputs.Surface Mount is used for mounting the led light driver.In this case, the result is a Linear with high efficiency.The LED driver has the capability of operating at a temperature of -40°C~125°C TJ.In this case, the termination value is 10.With 10 pins at the base, this LED driver has a base configuration.Under 4.5V voltage supply, undetermined failures may occur.There are 1 segments.It's mounted by Surface Mount.Part number STCS2 represents this LED driver.It is acceptable to supply voltages of 40V volts.In addition, it has 10 pins.In addition, a Display Drivers is assigned based on the characteristics of the object.The maximum efficiency standards can be met by operating at the minimal voltage of 4.5V during operation.Whenever the supply current is lower than 3μA, it can provide high efficiency.2A is the maximum current the load can handle.

STCS2ASPR Features


Available in the PowerSO-10 Exposed Bottom Pad package
Operating temperature of -40°C~125°C TJ
Supply voltage of 12V

STCS2ASPR Applications


There are a lot of STMicroelectronics STCS2ASPR LED Driver ICs applications.

  • Linear fluorescent
  • Museum lighting
  • LED Lightings for Inspection Devices
  • Other Electronic Devices
  • High-end retail lighting
  • Portable lighting
  • Architectural lighting
  • LED backlight driver for LCD displays for portable equipment
  • Panel lighting
  • Amusement Machines

Write a review

Note: HTML is not translated!
    Bad           Good