ST16C2550IQ48-F
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Feature | Internal Oscillator, Timer/Counter |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | 5A991.B |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| Technology | CMOS |
| Voltage - Supply | 2.97V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 64MHz |
| Supply Current-Max | 3mA |
| Address Bus Width | 3 |
| Protocol | RS232, RS485 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Data Rate (Max) | 4Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.5 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
ST16C2550IQ48-F Overview
The 48-TQFP package is the most cost-effective.The transmission of information is carried out through 2, DUART channels.For packaging purposes, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.A configuration of 48 terminations is used.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Active.In order to communicate data, there are 2 serial I/Os.Mounting is possible through Surface Mount.During operation, the supply voltage is set to 2.97V~5.5V.This IC operates at a clock frequency of 64MHz.Several characteristics of Internal Oscillator, Timer/Counter can be observed in it.Operating at 85°C is its maximum temperature limit.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 3.3V SUPPLY.A minimum operating temperature of -40°C is possible.A maximum supply current of 3mA is acceptable.
ST16C2550IQ48-F Features
2 serial I/Os
Clock frequency of 64MHz
ALSO OPERATES AT 3.3V SUPPLY
ST16C2550IQ48-F Applications
There are a lot of MaxLinear, Inc. ST16C2550IQ48-F UARTs applications.
- Industrial computing
- Network Management
- Factory automation and process control
- Factory Automation and Process Controls
- Telecommunication Network Routers
- Universal PCI Bus Add-in Card
- Battery Operated Electronics
- Factory Automation
- Portable and battery operated devices
- Handheld Terminal